Three Body Cooler

For the customer who wants a quality body cooler with no worries about on-site assembly, B&L Cremation Systems, Inc. provides a preassembled unit. Our Three Body Cooler is manufactured and assembled in the U.S.A. with 4” polyurethane foam instead of Styrofoam for a more energy efficient cooler. Complete with three roller shelves rated for 500 lbs. each. An evaporation tray that automatically dispenses and eliminates condensation for a worry and mess free operation. We ship the cooler completely assembled for off-loading and ready to plug in your standard 120 Volt / 10 Amp outlet.


Specification

U.S. Standard Metric System

Length:

Shelf Length:

Width:

Interior Width:

Height:

Hinge Side:

Horsepower:

Phase:

Voltage:

7′ – 8″

6′ – 0″

3′ – 0.50″

2′ – 0.50″

6′ – 6.50″

Left or Right

0.33 HP

1

120 V

2.34 m

1.83 m

0.93 m

0.62 m

1.69 m

.

.

.

.

Walk-In Body Cooler

From a 6 Body Cooler to a 100 Body Cooler or more the sky is the limit when it comes to our walk-in body coolers. Our Walk-In Body Coolers are manufactured in the U.S.A. with 4” polyurethane foam instead of Styrofoam for a more energy efficient cooler. Our roller racks rated for 500 lbs. per shelf are available in three or four tiers and can be end loaded or side loaded depending on the configuration required. All panel to panel connections utilize the same tongue and groove lock system making assembling the coolers on site a breeze.

 

Oversized Four Body Cooler

For the customer who wants a quality body cooler with no worries about on-site assembly, B&L Cremation Systems, Inc. provides a preassembled unit. Our Four Body Cooler is manufactured and assembled in the U.S.A. with 4” polyurethane foam instead of Styrofoam for a more energy efficient cooler. Our oversized cooler will enable you to store either two oversized bodies up to 1,000 lbs. on the bottom shelf and 500 lbs. on the top roller shelf. You can also utilized the roller shelves for four regular sized bodies or a combination of both. An evaporation tray that automatically dispenses and eliminates condensation for a worry and mess free operation. We ship the cooler completely assembled for off-loading and ready to plug in your standard 120 Volt / 10 Amp outlet.

Oversized Cooler
Underwater Laboratories, Inc.
Oversized Cooler Inside

 


Specification

U.S. Standard Metric System

Length:

Shelf Length:

Width:

Interior Width:

Height:

Hinge Side:

Horsepower:

Phase:

Voltage:

8′ – 0″

7′ – 0″

4′ – 8.50″

4′ – 0″

5′ – 0″

Left or Right

0.50 HP

1

120 V

2.44 m

2.13 m

1.44 m

1.22 m

1.52 m

.

.

.

One Body Cart Cooler

For the customer who wants a quality body cooler with no worries about on-site assembly, B&L Cremation Systems, Inc. provides a preassembled unit. Our One Body Cart Cooler is manufactured and assembled in the U.S.A. with 4” polyurethane foam instead of Styrofoam for a more energy efficient cooler. Our One Body Cart Cooler comes with no floor so you can roll a cart directly into the cooler. An evaporation tray that automatically dispenses and eliminates condensation for a worry and mess free operation. We ship the cooler completely assembled for off-loading and ready to plug in your standard 120 Volt / 10 Amp outlet.


Roller Shelf

Roller Shelf
Roller shelving is provided with three body coolers and can be removed for cleaning or replacement.  Individual rollers can also be removed.

Stainless Steel Body Tray

Stainless Steel Body Tray

Our body tray is made from 18-gauge stainless steel and is 78 inches in length by 24 inches in width by 33 inches in depth.  All of the edges are rolled for easy handling and it has a smooth professional finish.


Nylon Bodyboard

½” Nylon bodyboard for easy body transfer with handles made in U.S.A.