Translation

Pet & Animal Cremation Products


ID Discs


Cremation ID Disc
B&L Cremation Systems discs are customizable with up to 3 separate lines of 12 characters and a 4th line for up to 5 numbers. Identification discs are made from 18 gauge stainless steel with a 1.25 inch diameter. The discs will not flake, burn, or melt at temperatures under 2600°F. The standard ID discs come in quantities of 100 to a pack. They are custom made and sequentially numbered.



Clean Out Rakes


Crematory Clean Out Rakes
Our steel clean-out rake enables you to pull cremated remains to the front of the machine or side cleanout without damaging and scraping the hearth, therefore, extending your unit's life. Available in Large - (12' with 10" Head), Medium - (9' with 10" Head) & Small - (5' with 10" Head). Also available in custom sizes.



Clean Out Brushes


Crematory Clean Out Brushes
Our steel clean-out brush enables you to remove all of the cremated remains in your cremation chamber without damaging and scraping the hearth, therefore, extending your unit's useful life. The steel bristled brush is removable allowing you to change the size of the brush head or replacing your old one when worn. Available in Large - (12' with 12" Head), Medium - (9' with 10" Head) & Small - (5' with 6" Head). Also available in custom sizes.



Cremated Remains Vacuum


Cremated Remains Vacuum
Our vacuum is a heavy duty, high-powered vacuum to clean up after cremations and keep your work area dust free. This vacuum also has a flame resistant filter and heat resistant bag.



Cremated Remains Collection Pan


Cremated Remains Collection Pan
Made from 14 gauge stainless steel, our cremated remains collection pan is perfect for retrieving hot remains and organizing after a cremation. It can be placed on our cremated remains cooling system for a quicker cool down time and also sorted thru with our hand trigger magnet for any metal remains. Sizes are 24" x 10" x 8". Custom Cremated Remains pans available.



Cremated Remains Cooling System


Cremated Remains Cooling System
This system comes ready to mount to a wall or any fixed structure. The system comes with tech screws for mounting to wood or steel. Fan on the bottom of the cooling system pushes air over the collection pan and cools the remains in just minutes for safe handling. The fan requires a 110V electrical outlet.



Animal Cremation Pan


Animal Cremation Pan
Made from 10 gauge stainless steel, our pan is reinforced with angle ribs to help prevent distortion due to the high heat of the cremation process. The sides of the tray prevent the remains from being scattered by the force of the burner.



Hand Trigger Magnet


Cremated Remains Hand Trigger Magnet
The hand trigger magnet is an essential part of your cremation tools. It is used to remove the metal parts from the cremated remains before processing. The magnet, when held over the remains, picks up the metal using a high powered magnetic force. When held over a disposal container, the trigger is pulled away from the metal particles. As the force weakens, the metallic drops into the container for disposal.



Stack


Crematory Stacks

Exhaust gases from the cremation process generally range from 500° to 1000°F. However, on occasion due to large cases or a malfunction of the equipment, these temperatures can soar to over 2000°F. While some companies attempt to cool these gasses with air, only a refractory lining of sufficient thickness and insulating capabilities will prevent a fire hazard. In a worst case scenario, our tests have shown that an unlined stainless steel stack actually turns orange even with air cooling at 2500°F. This could result in a building fire.

B&L Cremation Systems provides a 3" 2500°F insulating liner with a ten year warranty to safeguard your facility. Our lined stacks at an exhaust temperature of 2000°F have an outside wall temperature of approximately 400°F, well below the ignition temperature of wood. (Typical roof construction material)



 

Roof Thimble


Roof Thimble
The roof thimble, like the storm collar, weather proofs the installation. They are custom built to suit roof pitch and stack diameter. It is available in 16 gauge galvanized steel.


 

Storm Collar


Storm Collar
Storm collars dispense rain. They are mounted on the roof where the crematory stack comes out. The storm collar weather proofs the installation, while allowing hot air associated with the exhaust stacks to escape to the outside. They are available in galvanized or stainless steel, made to order to fit any stack diameter. The storm collar is a 2 piece item and easy to install and secure. A high temperature sealant is required for water proofing.



Air Louver


Air Louver
The air louver is a 2' x 2' motorized louver which replenishes ambient air back into the crematorium. Capable of passing 2,500 CFM of free air, the louver is located at or below burner height. The motorized damper can be interlocked with the controls of the retort.